Monday, August 2, 2010

Now it can entry into /sbin/init

Unfortunately it doesn't work, probably because com driver isn't correctly implemented.

U-Boot 1.1.1 (U-boot build #: 235) (SDK version: 1.9.0-312) (Build time: Apr 23 2009 - 19:30:08)

DRAM: 384 MB
Using default environment

Copying user supplied environment from file flash
Configuring boot bus for full 256meg access
Flash: 256 MB

ELF file is 64 bit
Attempting to allocate memory for ELF segment: addr: 0xffffffff81000000 (adjusted to: 0x0000000001000000), size 0x5bff30
Allocated memory for ELF segment: addr: 0xffffffff81000000, size 0x5bff30
Processing PHDR 0
Loading 53b5f0 bytes at ffffffff81000000
Clearing 84940 bytes at ffffffff8153b5f0
## Loading Linux kernel with entry point: 0xffffffff81000000 ...
Bootloader: Done loading app on coremask: 0x1
cvmctl:b00043f0 cvmmemctl:46104
Boot Descriptor Ver: 7 -> 1/2 CPU clock: 700MHz Core Mask: 0x1
Dram: 384 MB Board Type: 1 Revision: 1/0
Octeon Chip: 0 Rev 0/0 Mac Address 00.DE.AD.BE.EF.00 (255)
l1icache size:32768 line:128 set:0
l1dcache size:16384 line:128 set:0
l2size:131072 l3size:0
Initial setup done, switching console.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.

OpenBSD 4.7-current (RAMDISK) #16: Sun Aug 1 17:19:56 MDT 2010
real mem = 77856768 (74MB)
avail mem = 70893568 (67MB)
mainbus0 at root: Generic OCTEON
cpu0 at mainbus0: Unknown CPU type (0x6) rev 0.0 499 MHz, Unknown FPU type (0x6) rev 0.0
cpu0: cache L1-I 32KB D 16KB 4 way, L2 128KB direct
cpu0: Setsize 0:0
cpu0: Alias mask 0x0
cpu0: Config Register 8000c48f
cpu0: Cache configuration 0
cpu0: Status Register 508000e0
clock0 at mainbus0: ticker on int5 using count register
Timecounters tick every 10.000 msec
rd0: fixed, 8192 blocks
root on rd0a swap on rd0b dump on rd0b
dev=0x800 chrdev=0x1600 rawdev=0x1602
WARNING: No TOD clock, believing file system.
init: copying out path `/sbin/init' 11

No comments:

Post a Comment